Zip-Grip Wires

• 2.0mm pre-made wires with KL100 Zip-Clips
• Hang from a horizontal catenary wire for suspending services and signage
• 35 kg safe load
• Available in lengths up to 10m

Zip-Grip represents major material and time saving benefits on installations. A 3.0mm or 4.0mm catenary wire is tensioned between two fixed points using Zip-Clips and services are suspended from this wire using Zip-Grips. The Zip-Grip wires can be mounted on the catenary wire at any point and lock securely in position. On long runs Zip-Grips can be used at strategic points to support the catenary wire from above to prevent sagging.

Zip-Grips are ideal for suspending light fittings, cable trunking and signage in warehouses and supermarkets where the roof steels and purlins may not be suited to the racking or shelving aisles. The catenary wires can be installed in any position and suspensions added and removed as required. Another key consideration is that access is made far easier in terms of the height and positioning of access equipment.