Heller Rebar Cutters

  • For drilling reinforcement up to 10mm thick
  • Use with SDS machine in hammer mode
  • High grade individually embedded carbide teeth for extreme durability
  • 190mm drilling depth
  • Requires SDS adaptor
  • Extension shanks are for 28 & 30mm cutters only

Heller rebar cutters will drill through reinforcement quickly using hammer action. The rebar cutter should be used when reinforcement is encountered during drilling. After drilling through the reinforcement switch back to the drill bit and finish the hole.

Category:
Code Size / Ref Request a quote
2075012 12mm Speak to a specialist on 0115 922 1585. Speak to a specialist on 0115 922 1585.
2075014 14mm Speak to a specialist on 0115 922 1585. Speak to a specialist on 0115 922 1585.
2075016 16mm Speak to a specialist on 0115 922 1585. Speak to a specialist on 0115 922 1585.
2075018 18mm Speak to a specialist on 0115 922 1585. Speak to a specialist on 0115 922 1585.
2075020 20mm Speak to a specialist on 0115 922 1585. Speak to a specialist on 0115 922 1585.
2075025 25mm Speak to a specialist on 0115 922 1585. Speak to a specialist on 0115 922 1585.
2075028 28mm Speak to a specialist on 0115 922 1585. Speak to a specialist on 0115 922 1585.
2075030 30mm Speak to a specialist on 0115 922 1585. Speak to a specialist on 0115 922 1585.
2075102 10231 Speak to a specialist on 0115 922 1585. Speak to a specialist on 0115 922 1585.
2075155 15547 Speak to a specialist on 0115 922 1585. Speak to a specialist on 0115 922 1585.