BZP Self Drill Dry Wall Screws

  • Fine thread screws with Self Drill point
  • For fixing to heavier gauge metal studs up to 2.5mm
  • Bright Zinc Plated finish
  • Phillips No.2 drive
  • CE marked and comply with BS EN 14566

Drywall screws should be driven straight and the head set slightly below the surface. The Bugle Head design avoids tearing the paper surface of the board. The recommended tool for self drill drywall screws is a Drywall Screwdriver with a speed of 2000 – 3000rpm and a depth setting nose-piece.

Category:
CodeSize / RefRequest a quote
065633232 x 3.5 Speak to a specialist on 0115 922 1585.
Add to quote
Add to quote
065633838 x 3.5 Speak to a specialist on 0115 922 1585.
Add to quote
Add to quote
065634242 x 3.5 Speak to a specialist on 0115 922 1585.
Add to quote
Add to quote
065635050 x 3.5 Speak to a specialist on 0115 922 1585.
Add to quote
Add to quote
065643265 x 3.9 Speak to a specialist on 0115 922 1585.
Add to quote
Add to quote
065643775 x 4.2 Speak to a specialist on 0115 922 1585.
Add to quote
Add to quote
065632525 x 3.5 Speak to a specialist on 0115 922 1585.
Add to quote
Add to quote