BZP Drywall Screws

  • Fine thread screws with sharp point
  • For fixing to metal studs of 0.5 – 0.9mm
  • Bright Zinc Plated finish
  • Phillips No.2 drive
  • CE marked and comply with BS EN 14566

Drywall screws should be driven straight and the head set slightly below the surface. The Bugle Head design avoids tearing the paper surface of the board. The recommended tool for sharp point screws is a Drywall Screwdriver with a speed of 4000 – 6000rpm and a depth setting nose-piece.

Category:
Code Size / Ref Request a quote
0651312 25 x 3.5 Speak to a specialist on 0115 922 1585. Speak to a specialist on 0115 922 1585.
0651316 32 x 3.5 Speak to a specialist on 0115 922 1585. Speak to a specialist on 0115 922 1585.
0651319 38 x 3.5 Speak to a specialist on 0115 922 1585. Speak to a specialist on 0115 922 1585.
0651321 42 x 3.5 Speak to a specialist on 0115 922 1585. Speak to a specialist on 0115 922 1585.
0651325 50 x 3.5 Speak to a specialist on 0115 922 1585. Speak to a specialist on 0115 922 1585.
0651432 65 x 4.2 Speak to a specialist on 0115 922 1585. Speak to a specialist on 0115 922 1585.
0651437 75 x 4.2 Speak to a specialist on 0115 922 1585. Speak to a specialist on 0115 922 1585.
0651550 100 x 4.8 Speak to a specialist on 0115 922 1585. Speak to a specialist on 0115 922 1585.